TrimPro Rotor + WorkStation

The new TRIMPRO ROTOR with WORKSTATION has been designed and developed at the request of end users who are looking for yet another gentle and efficient Trimpro quality product. The TRIMPRO WORKSTATION allows for the operator to work faster as the trimmings are collected in the bag instead of collecting on the surface under the ROTOR. Employing leather fingers to circulate your flowers over our non-stick grate, the leaves are trimmed by our razor sharp tempered steel blades. Built at an angle, emptying the Rotor is as simple as swinging the latch to open the door and your perfectly trimmed flowers gently exit the upper cylinder, all while the machine is still running so production is non-stop. As with all our machines, the blade height is adjustable to meet every preference. For trimming, separate the fresh flowers from the branches, put them into the upper container of the trimmer and let the Rotor do the rest.GENERAL WARNINGS: Never place your fingers, gloves or any other body part in contact with the grate or the blade. Never apply pressure on the grate. Do not use scissors, knives or any instrument above the grate. Safety glasses and gloves are required at all time. The gloves have to be tight enough so they don't get inside the grate slots. A loose glove is dangerous. BE AWARE! The manufacturer does not accept any responsibility for damages caused to or by the trimmers resulting from an inadequate use or assembly. Use the trimmers in accordance with existing laws and regulations. TECHNICAL DETAILS: FORMAT: Mounted machine: 16" Diameter x 21" Packaging: 21" x 21" x 24" WEIGHT: Machine only: 30 Lbs Machine and packaging: 41 Lbs MATERIAL: Frame: Aluminum Grate: Steel GRATES: Trimpro Rotor grate (Standard): (1/4")