480W, 2.8 µmol/J, 1344 µmol/s
Fanless Design, IP65 Waterproof, 0-10V Dimming
Full spectrum (FSM), Osram LEDs, Sunribio IR, LM-80

The Hobbyist's New Best Deal

The Hortimol MGLed Full spectrum fixture is a low consumption fixture specially developed to illuminate medium to large areas at a lower cost. In addition to its state-of-the-art performance, its ergonomic design allows you quick and easy installation, making it a must-have light for the avid grower.

• Fanless design
• Multi-bar design using passive cooling providing an even lighting distribution
• Fit 120x120cm*

Full Spectrum Mixed :FSM

Rich and balanced

This spectrum has been specially developed to imitate the light offered by the sun. With a most natural energy distribution, this full spectrum variant contains high levels of red 660 and blue 450. As a result, your plants will thank you and start to grow and grow, as if they were constantly under a blazing sun, but without excess heat.

With its unparalleled energy balance, this spectrum is able not only to saturate chlorophylls A and B for photosynthesis, but also to stimulate at the highest levels the secondary photosensitive metabolic pathways which can play an important role during reproduction. It is therefore easier than ever to keep genetics stable from generation to generation under artificial light.

A natural light, naturally

Another advantage, but not least, is the natural rendering of colors that this light offers you. Indeed, we have managed to push the energy levels to the highest in all frequency ranges of the spectrum, which offers a heat of 3200 ° K and a CRI 85 which will allow you to carry out your diagnoses without having to resort to corrective glasses or fill-in light. Your plants will have the color they would have if they were observed under the sun in the middle of its descending phase, so what could be more suitable?

* The surfaces are given as an indication for an installation with entirely artificial lighting. The height of the lamp and the light needs of the plants must be taken into account to determine the really usable surface. This can be lower or higher depending on the type of installation and use

VOI-BOX & AIR CONDITIONING & MOISTURE CONTROL IN 1
 
The Mini Controller CLI MATE® is a complete control unit for controlling room lighting and climate!
 

•           Plug and Play
•           user
•           Ready to use
•           analog
•           Equipped with high quality components

The Mini-Controller is available in:
 
2 x max. 600W + 3 AMP Climate Control
4 x max. 600W + 7 AMP climate control
 
 
Technical characteristics

•           Power supply: 1 phase 220 / 240V - 50Hz
•           Protection: IP44
•           Dimensions: 240x190x100mm
•           Contact input: Max. 600 WATT
•           Input stove please contact: Max. 3500 WATT
•           Temperature range: 5-55 ° C
•           Differential: 1 ° C per step

ø 160mm

520m³/h

Clamp with clamping screw in galvanized steel.

Diameter : 60-165mm

Ducting clip's width : 6mm

Ideal for ventilation ducts connections.

Adaptable on all ducts, extractors or filters of the same diameter available in our stock. The tightening is done with a screw.

This ducting clip is able to bring together 2 round parts with a diameter between 60 and 165mm.

The ducting clip is made of stainless steel: This material is corrosion resistant, durable and adapts well to temperature changes.

This object can be useful in all circumstances ; Gardening, plumbing,... It can be used indoors and outdoors.

Discover more duting clips on our website !

425-467m³/h

160mm Ø

Compact box fan for growers wanting to conserve space in grow rooms and spaces.

It is ideal for use in a grow room or grow box and provides excellent air circulation.

The "louvre" function circulates air in all directions to ensure continuous and optimal airflow in a large grow space, rather than concentrating all power in one direction.

Its unparalleled 50w of power makes it the most powerful box fan in its class

Features:

- 30cm blades

- 50W power

- 220 - 240V

- 3 speeds of operation

Clipfan, 15W

15 Watt clip-on fan.

2-speed fan.

‎

Diameter: 15cm

‎

Strength: 15W

‎

Volts: 220V - 240V

‎

Frequency: 50 / 60Hz

‎

Speed: 2100 RPM

‎

Air flow: 200 m3 / h

‎

Colour : White

‎

‎

The motor has a copper stopper, thus extending the life of the device. Copper is a good conductor for heat and electricity, preventing the growth of bacteria.

The motor has 2 AC speeds.

‎

Thanks to the clamp that's made with a metal spring, the fan ensures good stability on any edge. However, it is still better to use it indoors.

‎

You can find more clipfan models on our website !

‎

‎

Ceramic heating pro 1000w-2000w of high quality.

4 positions (Off / Cold / 1000 W / 2000 W)

Overheating safety

Rollover protection

Adjustable thermostat

Equipped with a handle

Thermometer / Hygrometer, min/max

PROHYGRO HYGROTHERMO PREMIUM

Thermometer / Hygrometer

‎‎

Dimensions: 12x9x2.5cm

Screen size:  6.5x7.5cm

Probe length: 1.5m

Min / max temperature range: 0° C - 50° C (32° F - 122° F)

Accuracy: ± 1° C / RH ± 5% relative humidity

‎Internal hygro capacity: 25% / RH 90%

‎

Thanks to this device, you will be able to measure the humidity rate and the ambient air of the place where you will put it. It is possible to place it in a horticultural environment (greenhouses) as well as in a domestic environment. It can be placed against a wall or placed on a straight surface.

In addition, this thermometer-hygrometer is able to save the recorded data. Its min / max memory function allows you to see the maximum and minimum temperatures that were recorded throughout the day.

It has an LCD screen. LCD screens are durable and have a reasonable price.

The product also contains a remote probe.

There is the possibility of changing Celsius to Fahrenheit, and vice versa.

‎

You can find a wider choice of hygrometer thermometers on our website !

15l fabric pot equipped with handles

Promotes optimal root health

25x25x25cm

New Gold Label Fabric Pots, meant for air pruning

In the case of a plant grown in a conventional plastic pot, the roots roll up inside the plastic pot. The roots become excessively long as the plant continues to search for new areas of fertile substrate rather than developing branches. The roots will even come to protrude from the holes below the plastic pots. They will continue to grow below these unless controlled with open air.

Air pruning occurs naturally when the root tips come into contact with air. Instead of continuing to spread, the root tip dies, and more roots grow to create a fibrous mass. Instead of a few large and long spaghetti-like roots, plants that have had their root system controlled in contact with the air develop a root mass made up of a multitude of small roots wandering throughout the growing medium. By encouraging a dense root mass, in an oxygenated and well-drained medium, your plants will be able to assimilate more nutrient solutions and you won't have to worry about root rot. This will also result in better growth of stronger plants, and the end result will therefore be bigger harvests at the end of the cycle.

Square saucer for pots

Square saucer made of black plastic

29x29cm

Ideal for our pots of 18 and 25l.

It collects the water that comes from under the pots.

Thanks to this, the plant will be able to draw off the excess as soon as it needs it.

The used material is resistant and heat resistant. In fact, the saucer is made of polypropylene: a material resistant to heat and to abrasion (Resistant to friction that may cause scratches).

The appearance is simple, which makes the saucer fit in any setting, whether it's in your garden or indoors.