Blog

Pack Lumatek 250w

Pack content

Lumatek dimmable 150w / 175w / 250w + Super Lumens

Key Specifications/Special Features:

Electronic ballast for 150W,175W or 250W HPS or MH lamp
Voltage: 240V 50/60Hz
Current: 1.20A
Input Power: 265W
Output power: 250W
Power factor: >0.99
Voltage range: 175 to 275V
THD: <8%
Lamp CCF: <1.7
Operating frequency: high frequency
No audible noise, no flicker
Envirement temperature for full load operation: -25 to 50 °C (-13 to 122 °F)
Enclosure temperature rise: (Δt) 25 °C (77 °F)
Environment IP require: >IP23
Humidity: capable of operating in relative humidity of 0% to 90%,non-condensing.

To light a 150W lamp; set control to 150W.
To light a 175W lamp; set control to 175W or dim to 150W.
To light a 250W lamp; set control to 250w and boost output by 10% by switching to 'Super Lumens' or dim down to 175W or 150W.

Lumatek bulbs are also available from Microfluo.

Data sheet

Voucher: eco

Data sheet

Voucher: eco

Power cord 2mtr long

Section: 3 x 1.5mm²

End: Male plug and bare wires

For pre-wired or electronic ballast fittings to reflectors.

Also exists in 4mtr long.

Data sheet

Voucher: eco

HPS 250W
E40

The SUPERPLANT light bulb range has been extended with the arrival of the HPS electronic ballast bulbs!

The HPS "electronic" bulbs are designed to work specifically with electronic ballasts for better light output, longer life and increased reliability. Their reinforced armature and discharge tube that does not resonate at high frequency solves the problems associated with using a dimmer on a conventional HPS bulb.

Like the rest of the range, the bulbs have been inspected and tested by the DEKRA laboratory, an internationally accredited body for European certification.