GROWMAX WATER PUMPKIT - GMWROPUMPKIT
Get the most out of your osmosis system by increasing the water inlet pressure to 4 BAR (60 PSI - 4 Kg/cm2)
Necessary in all installations with a water inlet pressure below 3 BAR (45 PSI - 3Kg / cm2).
Optimizes water production and reduces water discharge.
Discreet packaging and protected
Delivery 24 to 48 hours - Free from € 100
Exchange for 30 days - 2 year warranty
Description:
The Booster Pump Kit is recommended for use with POWER GROW 500 and
MAXQUARIUM 000 PPM Reverse Osmosis Systems when low inlet pressure is under
40 PSI (3kg/cm2).
Specifications:
1. Boosts pressure to 60+ PSI (4kg/cm2).
2. Information Power Pump INPUT:
• AC 220v-240v
• 50/60Hz
• OUTPUT: DC 24v
• 1.2A
Recomendations:
Use teflon tape for the pump elbow connectors.
*Install Shut Off Switch only when we have the Float Valve Kit installed in the
tank.
When the tank is full of water, the float valve will cause the system to stop
producing water and the pressure switch will cut off the pump's electricity.
NOTE: the pumps are DC, so if we don't cut the power, it could burn.
support@growmaxwater.com
www.GrowmaxWater.com