- -30%
Gavita Pro 1000e DE SL - Slim ( E-series )
Discreet packaging and protected
Delivery 24 to 48 hours - Free from € 100
Exchange for 30 days - 2 year warranty
Gavita Pro 1000e DE 208-240 SL
The Gavita Slim Line series is part of the 'professional' line of fixtures. Designed especially for grow rooms, our professional fixtures suit flexible and fixed installations. They are compact and come with a Repeater Bus interface (no manual control). For 208V three-phase or 240V. The reduced height make this the fixture of choice for low rooms.
- Slim-line ballast, only 9.7 inches (19,4 cm) high
- Highest light output and maintenance over time
- Highly efficient passive cooling of ballast for longer electronics lifetime
- Sealed housings with Gore-Tex® ventilation plugs
- External control with Repeater Bus interface
- Mounting brackets for Unistrut/c-profiles available
Features & Benefits
Slim LineWhen lighting plants, the distance to crop a crucial factor. The right distance gives you the desired light levels and optimal uniformity. In rooms with a low ceiling or retrofits every inch matters. By optimizing the fixture for professional grows, we were able to create a ballast measuring only 9.7 inches high without compromising quality or cooling efficacy. |
Repeater Bus configurationGavita developed the Repeater Bus interface for fixed installations in professional environments. The Gavita difference is the double-port connector on the ballast. The active interface repeats the input signal to the output. This setup lets you directly daisy chain 100 fixtures per string and five strings per controller port to connect a maximum of 500 fixtures per controller port. |
Replaceable reflectorOur bracket is designed to be able to change you reflector quickly. Miro aluminum can not easily be cleaned, and when you clean it, it will never be as good as a new reflector. We recommend to change reflectors every year in a “dirty” environment (dust, foggers, sprays) or every two years in a clean environment. |
No moving parts, optimal thermal managementOur ballasts are completely sealed and passively cooled through the extrusion aluminum ballast housing. Our housings provide optimized thermal management, which keeps the electronics much cooler than in die-cast housings. Good thermal management is extremely important for the lifetime and reliability of the electronics. |
Technical specifications
Product weight | 8.4 lbs (3.8 kg) | ||
Dimensions (L*W*H) | 22.2”x9.7”x7.8” (56,5x24.5x19.5cm) (height excl. mounting hooks) | ||
Temperature case | < 70 °Celsius / 158 °Fahrenheit | ||
Temperature ambient | 0 ~ 35 °Celsius / 32 ~ 95 °Fahrenheit | ||
Input voltage +/-10% | 208 V AC | 240 V AC | |
Input current at 100% | 5.2 A | 4.5 A | |
Input current at 115% | 5.9 A | 5.1 A | |
Max current | 6.8 A | ||
Input power at 100% | 1000 W | ||
Input power at 115% | 1236 W | ||
Apparent power +/- 3% | 1082 VA | ||
Power factor | 0.97 - 0.99 | ||
Relative humidity | < 70% (not condensating) | ||
Total Harmonic Distortion | < 10% | ||
Frequency | 50 - 60 Hz | ||
Certification | c CSA us | ||
Insulation | Class 1 - requires an earth connection | ||
Power inlet | IEC C14 | ||
Power output settings | 50 - 115% | ||
External control signal: | RJ connector built in (6P6C) | ||
Ignition voltage: | 5 kV / 600 ms | ||
Inrush current: | ≤ 40 Amps | ||
Inrush duration: | 1,6ms | ||
Earth leakage current: | ≤ 1 mA |
Compatible products and accessories
Product name | Gavita part number | ||
Compatible controllers | Gavita EL1 Master controller | 41.00.12.20 | |
Gavita EL2 Master controller | 41.00.13.20 | ||
Replacement reflector | Gavita HR96 DE | 30.46.13.00 | |
Gavita MD 135 DE HC | 30.07.13.00 | ||
Gavita W 150 DE | 31.26.13.00 | ||
Compatible lamps | Gavita Pro Plus 1000 W EL DE HPS | 26.10.16.12 | |
Compatible power cord | Power cord US 240 V, 2.5 meter / 8.2 ft | 44.30.41.10 | |
Compatible interconnect cable | Interconnect cable RJ | 43.50.00.17 | |
Repeater bus connection kit | 43.50.10.00 |