Smart Controller 6.5 amp MK2e - Smscom

The SMSCOM Smart Controller is a compact ventilation controller in a pluggable housing. The maximum current is 6.5 amps. The SMSCOM Smart Controller is electronically controlled and provides a simple and accurate method for the correct temperature in your room (NTC* must be connected). The SMSCOM Smart Controller constantly regulates the right speed for your fans and reserves the right temperature.

* NTC not included. Must be ordered separately.

Function

By dynamicallycontrolling the operating speed of an exhaust fan, the controller intelligent creates the perfect climate by precisely maintaining the temperature while keeping the airflow under control at all times.

Once you set the temperature level you want, the smart controller constantly monitors the room temperature and makes adjustments >necessary fan speed to ensure constant temperature maintenance.

Operation:

The smart controller uses our "Motion Flow" software; it therefore reacts quite differently compared to the usual types of controllers, which generally operate at 2 speeds only.

Smart controller automatically adapts fan speeds to 60 different settings to provide the best fan speed control and most accurate temperature maintenance from any type of controller. This new technology also produces less noise and extends the life of your fan.

The smart controller requires no wiring, as it is Plug & Play. Simply plug in your fan, set the desired temperature and minimum fan speed, and the smart controller takes care of the rest.

When you first install the smart controller, it will take 5-10 minutes to scan your room to determine the correct running speed for your fan. </strong >Once this time has elapsed, the controller knows the exact speed your fans need to run at to maintain the temperature. Then the smart controller makes the adjustments < em>automatic fan speeds to maintain the set temperature at all times. There is no need to touch the controller again!

Night Operation:

Indark cycle, when the temperature drops, the fan goes to the set minimum speed by the user. Airflow is maintained at all times to allow better humidity control during the dark cycle.

Smart Controller Setting:

1. 1. Place the controller in a suitable place and put the temperature sensor in the center of the growing area. Avoid placing the temperature sensor where it will read an incorrect temperature, such as in direct sunlight or in the cool incoming airflow from the ventilation system.

2. Connect your fan to the smart controller.
3. Plug the smart controller into a power outlet.
4. Set the minimum fan speed of your choice**
5. Set your desired temperature

The smart controller is now scanning your room. BE PATIENT! This may take 5-10 minutes!! During the scan, the smart controller will run for a few seconds at full power and then at its minimum setting. After 5-10 minutes, the controller will assess the correct speed and no longer require manual adjustment. The smart controller automatically makes the necessary adaptations to maintain the temperature.