Discreet packaging and protected
Delivery 24 to 48 hours - Free from € 100
Exchange for 30 days - 2 year warranty
The Airtech fancontroller with thermostat controls the capacity of your extractor based on the set temperature. The minimum extraction setting can be adjusted from 0 to 100%.
Note : The extractor must always keep running to prevent irreparable damage to the product. If the temparature exceeds the maximum temperature setting as set on the thermostat, the fancontroller will switch to maximum capacity. When the set maximum temperature is reached, the extractor will return to the minimum setting.
Connecting the fancontroller + Thermostat
Connect the thermostat to the fancontoller, using the jack plug into the controller. Use the extension cable if this is necessary. Connect the fancontroller to the mains.
Note : Make sure the thermostat is not placed directly in the airstream of the extractor, this creates unnecessary starts ans stops of the thermostat
230v / 50 Hz
1500 Watt Maximum
Data sheet
