Analog timer

Max 16 A - 3680 W

Analogue timer TEMPRO

‎

Dimensions : 10.5 x 5.5 x 3cm

Power : 3680W

Intensity : 16A

Voltage : 210-230V

Frequency : 50-60Hz

Colours : Black and yellow

Plug : FR/CZ

‎

This timer is the ideal product to switch on and/or switch off harvest accessories (such as lighting, electrical devices, etc). It's easy to program and install.

You can program it to run every day.  

‎

Discover more timers on our website !

‎

The Sylvania Grolux 250W lamp is one of the best value-for-money horticultural lamps available with added blue output for use in all stages of growing.

• Highly popular lamp made by the market-leading manufacturer
• Broad spectrum output makes it suitable for use in veg or flowering stages
• Specifically designed for optimum plant growth

Hammertone reflector aluminum 47 Cm with Socket E40

Accepts all bulbs with E40 socket:

•   Bulbs HPS (High Pressure Sodium) 250 400 600 and 1000 watts.
•   MH bulbs (Metal Halide) 250 400 600 and 1000 watts.

- Reflector dimensions: 47cm long x 47cm wide x 11.5 maximum height.

AC input 230v / 50hz / 250-1000w

wiring not supplied

Hanger PROHANGER Regular

Used to hang objects like leds and filters, 2 pieces per box.

Maximum weight : 48kg (2x24kg)

Maximum length : 150cm

This product is designed for the suspension in culture chambers, for the lighting that allows flowering. It's also used to hang carbon filters.

Height adjustment is possible and easy.

The carabiners are resistant, made of steel. The strings are made of nylon, a flexible and easy to handle material.

CEE 7/7 - 3G 1.5 (2m)

Power cable with CEE 7/7 male plug, 2 meters long.

Used for connections to your ballasts, extractors or reflectors for CFL lamps.

Sold by meter

Flexible electric cable 3x2.5mm²

Sold by meter

ø 125mm

280m³/h

APPLICATION
The VENTS TT fans are featured with wide capabilities and high performance of axial and centrifugal fans and are specifically designed for supply and exhaust ventilation of premises requiring high pressure, powerful air flow and low noise level.	The fans are compatible with round air ducts from Ø 100 to 315 mm. Exhaust ventilation systems based on the VENTS TT fans are the best solution for ventilation of bathrooms and kitchens and other humid premises as well for ventilation of flats, cottages, shops, cafes, etc.
DESIGN
The casing is made of high-quality durable plastic.	All the models may be equipped with a regulated timer with turn-off delay adjustable from 2 to 30 min.
The removable impeller and motor block with a terminal box is fixed to the casing assembled with the spigots by means of special clamps with latches. This makes the fan maintenance fast and easy. The fan maintenance does not require total disassembling. Just pull out the central block from the casing and perform required servicing.
MOTOR
The models of VENTS TT series are equipped with a single phase motor and are available in single or two speed modifications. Some dimension types are available with a more powerful motor (VENTS TT…S). The motors have thermal overheating protection to prevent the motor overload.	The ball bearings extend the motor service life up to 40 000 hrs. at non-stop operation. The motor has IP X4 ingress protection rating.
SPEED CONTROL
The double-speed motors are controlled with a built-in switch (V option) or an external switch for multi-speed fans (available upon separate order).	An integrated speed controller (option P), an external TRIAC or autotransformer speed controller (available upon separate order) are used for smooth speed control when connected to the maximum speed terminal.
MOUNTING
The fans are suitable for mounting at any angle and point of the system. Several fans may be installed inside one system.  Several fans may be installed inside one system: parallel mounting to increase air flow; in series mounting to increase operating pressure;	The fan case is equipped with a flat mounting plate to attach the fan to the wall. The mounting box may be installed in any position to facilitate mounting and wiring.
THE FAN WITH ELECTRONIC MODULE OF THE TEMPERATURE SENSOR AND SPEED CONTROLLER (U OPTION)
The ideal solution for ventilation of the premises with high demands to permanent indoor temperature level, e.g. greenhouses. The fan with the electronic module of the temperature sensor and the speed controller is used for automatic speed control (air capacity regulation) depending on the air temperature in the ventilation duct or inside a room. Two modifications are possible: temperature sensor integrated inside a fan duct (U/U1 option) external temperature sensor fixed on 4 m power cable (Un / U1n option)	The electronic module of the front panel incorporates: the speed control knob for the setting the impeller speed; the thermostat control knob for setting the temperature set point.  thermostat LED light.
OPERATING LOGIC OF THE FAN WITH THE ELECTRONIC MODULE OF THE TEMPERATURE SENSOR AND SPEED CONTROLLER
Set the desired air temperature (set point of the thermostat) with the thermostat control knob. Set the required minimum impeller speed (air flow) with the speed control knob. The motor switches to maximum speed (maximum air flow) as the temperature reaches and exceeds the set temperature set point. The motor switches to the pre-set speed as the temperature drops down below the set temperature point.	To avoid the frequent motor switching, e.g. when the temperature in the supply air duct is equal to the threshold value, the switching delay time is activated.
There are two switch delay patterns for various cases:
The temperature sensor-based switch delay (U option): the motor switches to higher speed as the air temperature exceeds 2°C above the set thermostat set point. The motor revers to the pre-set lower speed as the air temperature drops below the thermostat set point. This pattern is used to keep air temperature to within 2°C. In this case the fan switches are rare.	The timer-based switch delay (U1 option): as the air temperature exceeds the set thermostat set point, the motor switches to higher speed and the switch delay timer is activated for 5 min. The motor reverts to lower speed as the air temperature drops down below the thermostat set point and only after the timer countdown.This pattern is used for exact air temperature control. The fan changes its speed more often as compared to the temperature sensor-based switch delay, however the minimum timer interval is 5 minutes.
TT FANS APPLICATIONS
bathroom ventilation example	office ventilation example
parallel installation of fans in the storehouse to increase the air capacity

Box of 10m flexible aluminum ventilation duct diameter 127mm.

Use for 125mm diameter vent systems

Aluconnect hoses are available in different diameters: 102, 127, 152, 160, 203, 254 and 315mm

See the Microfluo catalog for connectors, reducers, cable ties and adhesive.

Flange 100mm or 125mm

to choose from not included

 Can-Filter

150PL, 1500PL, 300PL, 425PL,

2600PL, 9000PL

Air intake connector for Can Filter 1500, 2600 and 9000 carbon filters

Also available in 100mm diameter

Very easy to adapt

PVC 125mm

Flange, wall connector, PVC fitting for your ventilation ducts and air ducts.

Available in 125, 200, 250, 315, 350 and 400mm

Also find fixing accessories in the Microfluo catalog (Clamps, different types of tape ....)

Clamp with clamping screw in galvanized steel.

Diameter : 60-165mm

Ducting clip's width : 6mm

Ideal for ventilation ducts connections.

Adaptable on all ducts, extractors or filters of the same diameter available in our stock. The tightening is done with a screw.

This ducting clip is able to bring together 2 round parts with a diameter between 60 and 165mm.

The ducting clip is made of stainless steel: This material is corrosion resistant, durable and adapts well to temperature changes.

This object can be useful in all circumstances ; Gardening, plumbing,... It can be used indoors and outdoors.

Discover more duting clips on our website !

Oscillating clip fan

Oscillating Clip Fan "Monkey" 

‎

Size : 20cm

Weight : 1kg

Diameter : 23cm

Power : 20 watt

Voltage : 220V

Colour : White

Rotation speed : 1500-2300 rpm

Has 2 speeds.

‎

This product, with its advantageous size and weight, makes the air circulate well in tents and grow rooms, while remaining silent.

Thanks to its clip, you can hang it anywhere. Thanks to its small size, it's not difficult to find a place for it. In addition, the fan can be slightly bent down so that it can aim the desired location.

It can grip on bars between 16cm and 21cm wide. The clamp is strong and will not make the fan fall on your plants.

The motor is made of copper : This prevents the product from overheating so it has a longer life, saves energy and makes it quieter.

Thanks to its 2 speeds, you can control the flow of air.

Cable length 150cm.

‎

Find more oscillating clipfans on our website !

Themometer - Hygrometer, min/max

PROHYGRO HYGROTHERMO PREMIUM

Thermometer / Hygrometer

‎‎

Dimensions: 11.5x6x1.2

Screen size:  4x4cm

Min / max temperature range: 0° C - 50° C (32° F - 122° F)

Accuracy: ± 1° C / RH ± 5% relative humidity

‎Internal hygro capacity: 25% / RH 90%

‎

Thanks to this device, you will be able to measure the humidity rate and the ambient air of the place where you will put it. It is possible to place it in a horticultural environment (greenhouses) as well as in a domestic environment. It can be placed against a wall or placed on a straight surface.

In addition, this thermometer-hygrometer is able to save the recorded data. Its min / max memory function allows you to see the maximum and minimum temperatures that were recorded throughout the day.

It has an LCD screen. LCD screens are durable and have a reasonable price.

There is the possibility of changing Celsius to Fahrenheit, and vice versa.

‎

You can find a wider choice of hygrometer thermometers on our website !

24x24xh27,7cm (11l)

16 pots / m²

Black square pot of 11 liters (24x24xh27,7cm) intended for indoor and outdoor gardening.

These pots can be used with all types of substrate (potting soil, coconut fibers, clay balls ...).
The square pots are suitable for growing rooms as well as for outdoors. Indeed, their shape maximizes the space of culture. Made of PVC, they are solid, UV resistant and very light.

With its raised and draining bottom, it allows a circulation of air by the soil, ideal for the oxygenation of the roots and will allow to evacuate the surplus of water during the watering /

This pot is made of a very strong plastic that makes it virtually unbreakable.

We advise you to add saucers adapted to the volume of your pots.

Our best value for money at MicroFluo.

Special price per large quantity (contact us)

Beginner's Kit Organic Basic

Get abundant and tasty crops with this basic organic fattening kit that includes everything you need to harvest, from growth to flowering in the best possible conditions.

This kit includes the 2 basic nutrients to use respectively in growth and flowering, Organic Grow and Organic Bloom. Both products will provide the necessary nutrients for the plants to grow properly.

During flowering, the Organic PK Booster will yield more abundant crops.

BAC discourages the use of enzymes with this range of nutrients.

The Organic BAC Starter Kit includes:

• 250 ml Organic Grow
• 500 ml Organic Bloom
• 250 ml Organic PK Booster

Compare with the "BAC Organic Pro Starter Kit"