Normal household timers are not built to take the high inductive loads produced by HID ballasts. If used with a HID ballast, the contacts inside the timer that open and close the timed circuit will overheat and weld together, breaking the timer and leaving your grow lights permanently on.

Suitable for timing on 600w HID ballasts

Pro Gear Ballast
Ballast suitable for both HPS and MH bulbs.

Pro Gear magnetic ballasts are covered by a metal shell against splashing and have ventilation holes to reduce the risk of overheating.

Thermal protection, fuse accessible on the front of the device.

Also available in 250W, 600W and 1000W

Power cable connected.
Plug & Play to reflector.

Requires only an IEC male cord to connect the ballast to the lamp.

Large selection of MH and HPS 400W bulbs

Power cord 5mtr long

Section: 3 x 1.5mm²

End: Male plug and bare wires

For pre-wired or electronic ballast fittings to reflectors.

HPS

The Sylvania Grolux 400W lamp is one of the best value-for-money horticultural lamps available with added blue output for use in all stages of growing.

• Highly popular lamp made by the market-leading manufacturer
• Broad spectrum output makes it suitable for use in veg or flowering stages
• 58,000 lumens output
• Specifically designed for optimum plant growth

How the Sylvania Grolux 400W HPS lamp works:

The Sylvania Grolux 400W HPS lamp is a dual-spectrum lamp with a high 58,000 lumens output. The lamp produces light mostly in the red part of the spectrum for excellent flowering but also produces some blue to make it also suitable for the vegetative growth stage.

Using the Sylvania Grolux 400W HPS lamp:

Using a clean cloth to hold the lamp, screw the lamp into the E40 bulb-holder fitting of your reflector. Always screw the lamp into the lamp-holder in your reflector as tightly as possible by gripping the lamp with a clean, dry cloth. If the lamp is not screwed in as tightly as possible, arcing can occur between the centre contact of the lamp and the lamp-holder. This melts the solder contact on the bottom of the lamp, causing damage and making it un-useable. Connect your reflector cable to your 400W HPS ballast. The wattage of your ballast MUST match the wattage of the lamp you are using or there will be a high risk of fires or equipment damage. Ensure the lamp is completely clean and free of dirt, grease and finger-prints before switching on.

Warning: Once the lamp is switched on it runs extremely hot. As with all high pressure sodium and metal halide bulbs it is necessary to avoid touching the lamp with anything such as fingers or plants as this may cause severe burns or fires. In particular avoid sprays or liquids coming into contact with the lamp as this may cause premature failure or even an explosion.

The Sylvania Grolux 400w HPS lamp is a great all-round, value-for money grow-lamp! As with all lamps the light output they produce will decrease with use over time. We recommend you replace your lamp regularly to maintain garden efficiency.

Hanger PROHANGER XL Carabiner

PROHANGER XL Carabiner

Used to hang objects like leds and filters, 2 pieces per box.

Maximum weight : 48kg (2x24kg)

Maximum length : 150cm

This product is designed for the suspension in culture chambers, for the lighting that allows flowering. It's also used to hang carbon filters.

Height adjustment is possible and easy.

The carabiners are resistant, made of steel. The strings are made of nylon, a flexible and easy to handle material.

Find more hangers on our website !

‎

ø 125mm

355m³/h

Extractor with integrated speed variator and thermostat.

Extractor suitable for indoor cultivation thanks to its 4m remote sensor, and its integrated speed variator.

Set the desired temperature on the extractor (for example 25 ° C), if the temperature of the space exceeds 25 ° C then the extractor starts to rotate at its maximum power (460m3 / h) to bring down the temperature excessive to restore it to 25 ° in the culture space.

Finally set the minimum speed with the 2nd potentiometer, it is the speed at which the extractor will turn when the temperature is below the threshold predefined by the 1st button.

Extractor of the original brand delivered with its wall bracket and a Euro plug a.

Materials of excellent quality and Made in Europe

Clipfan, 15W

15 Watt clip-on fan.

2-speed fan.

‎

Diameter: 15cm

‎

Strength: 15W

‎

Volts: 220V - 240V

‎

Frequency: 50 / 60Hz

‎

Speed: 2100 RPM

‎

Air flow: 200 m3 / h

‎

Colour : White

‎

‎

The motor has a copper stopper, thus extending the life of the device. Copper is a good conductor for heat and electricity, preventing the growth of bacteria.

The motor has 2 AC speeds.

‎

Thanks to the clamp that's made with a metal spring, the fan ensures good stability on any edge. However, it is still better to use it indoors.

‎

You can find more clipfan models on our website !

‎

‎

ø 127mm

10m

The CombiConnect sheath consists of an outer layer of plastic and reinforced with an aluminum laminate on the inside.

Suitable for applications in mechanical ventilation, extraction and other industrial applications.

Is used with all 125mm diameter extractors

Available in different diameters.

Sold by 10mtr box

Clamp with clamping screw in galvanized steel.

Diameter : 60-165mm

Ducting clip's width : 6mm

Ideal for ventilation ducts connections.

Adaptable on all ducts, extractors or filters of the same diameter available in our stock. The tightening is done with a screw.

This ducting clip is able to bring together 2 round parts with a diameter between 60 and 165mm.

The ducting clip is made of stainless steel: This material is corrosion resistant, durable and adapts well to temperature changes.

This object can be useful in all circumstances ; Gardening, plumbing,... It can be used indoors and outdoors.

Discover more duting clips on our website !

Flange 100mm or 125mm

to choose from not included

 Can-Filter

150PL, 1500PL, 300PL, 425PL,

2600PL, 9000PL

Air intake connector for Can Filter 1500, 2600 and 9000 carbon filters

Also available in 100mm diameter

Very easy to adapt

Thermometer / Hygrometer, min/max

PROHYGRO HYGROTHERMO PREMIUM

Thermometer / Hygrometer

‎‎‎

Dimensions: 15x8.5x2.5cm

Screen size:  9x6cm

Probe length: 1.5m

Min / max temperature range: 0° C - 50° C (32° F - 122° F)

Accuracy: ± 1° C / RH ± 5% relative humidity

‎Internal hygro capacity: 25% / RH 90%

‎

Thanks to this device, you will be able to measure the humidity rate and the ambient air of the place where you will put it. It is possible to place it in a horticultural environment (greenhouses) as well as in a domestic environment. Moreover, the screen displays three categories:

-Temperature IN

-Temperature OUT

-Humidity

‎

It can be placed against a wall or placed on a straight surface.

In addition, this thermometer-hygrometer is able to save the recorded data. Its min / max memory function allows you to see the maximum and minimum temperatures that were recorded throughout the day.

It also tells you whenever the ambiant air is too dry, too humid or comfortable for the plants. It's displayed with smileys :

‎

It has an LCD screen. LCD screens are durable and have a reasonable price. This screen can also glow in the dark, making it possible to see the information during the night.

The product also contains a remote probe.

There is the possibility of changing Celsius to Fahrenheit, and vice versa.

‎‎

You can find a wider choice of hygrometer thermometers on our website !

25mtr

• Excellent for all sealing applications.
• Attaching insulation to duct work and pipes.
• General repair tape.
• Good balance between strength, thickness and adhesion.
• Easy to unwind and tear.

11l fabric pot

Promotes optimal root health

22x22x24cm

New Gold Label Fabric Pots, meant for air pruning

In the case of a plant grown in a conventional plastic pot, the roots roll up inside the plastic pot. The roots become excessively long as the plant continues to search for new areas of fertile substrate rather than developing branches. The roots will even come to protrude from the holes below the plastic pots. They will continue to grow below these unless controlled with open air.

Air pruning occurs naturally when the root tips come into contact with air. Instead of continuing to spread, the root tip dies, and more roots grow to create a fibrous mass. Instead of a few large and long spaghetti-like roots, plants that have had their root system controlled in contact with the air develop a root mass made up of a multitude of small roots wandering throughout the growing medium. By encouraging a dense root mass, in an oxygenated and well-drained medium, your plants will be able to assimilate more nutrient solutions and you won't have to worry about root rot. This will also result in better growth of stronger plants, and the end result will therefore be bigger harvests at the end of the cycle.