SUPERPLANT - HPS/MH HYBRID 400W

A high pressure sodium (HPS) mixed with a metal halide (MH) to give the best absorption by plants.

This bulb will give you the best vegetative and floral quality on the market.

Specifications:

    Power: 400W
    Temperature: 2500°K
    PPF: 435.9 μmol/s
    Life: 10,000 hours
    Base: E40

Advice:

Bulb to be used with a suitable power supply and luminaire. Before replacing the old bulb, switch off the mains supply and allow it to cool. Used bulbs must be disposed of in accordance with current regulations. When fitting the bulb, check that the contact with the two poles of the socket is correct.

For safety reasons, replace it immediately if the glass is scratched or cracked. The bulb must always be placed in a closed luminaire (even when being tested) to limit the consequences of breakage. It must be protected from any contact during operation. To avoid damaging the ballast, bulbs that have reached the end of their life must be replaced quickly.

This will reduce the flux, resulting in a loss of around 20-25% of your harvest. Mains voltage should not vary by more than 3%. For continuous operation, the lamp must be switched off for at least 15 minutes once a week. The manufacturer declines all responsibility for any debates resulting from incorrect use of the lamp or