Subcategories
Filter By:
Active filters:
Techgrow S-4 CO₂ Sensor (2000ppm)
Achieve optimal conditions in your greenhouse with the smart S-4 Sensor 2,000 ppm from TechGrow. This all-in-one sensor measures the CO2 concentration, relative humidity and temperature in your room, and detects light.
The built-in light sensor enables automatic switching between day and night mode. If desired, you can manually set the light sensor to a non-stop day mode by means of a DIP switch.
Techgrow Seconds Timer Pro
The Seconds Timer Pro switches any device on and off accurate to the second. You can set a maximum of 50 switching times (25x on/25x off) in the handy menu of this digital controller.
You are able to schedule switching times for a complete week, mid-week or weekend on a day-by-day basis. The programmed cycle repeats continuously, until you set a new programme.
Techgrow CO₂ generator 4KW (LPG)
Increases the CO₂ value in your greenhouse With the right amount of CO₂ in the area, plants will become more active and therefore grow faster.
For rooms up to 90m³
Greenwire - Heating cable (6m)
- Heating cable for plants such as tub plants, palm trees and exotic species
- 6 m long heating cable with 2 m power supply cable
Techgrow CO₂ generator 8KW (LPG)
Increases the CO2 value in your greenhouse With the right amount of CO2 in the area, plants will become more active and therefore grow faster.
For rooms up to 180m³
Techgrow CO₂ generator 10KW (LPG)
Increases the CO₂ value in your greenhouse The CO₂ generator makes it possible to provide your greenhouse with extra CO₂ when needed so that the CO₂ value always reaches the desired level. With the right amount of CO₂ in the area, plants will become more active and therefore grow faster. The generator operates without pilot flame, but by electric ignition which leads to a lower gas consumption.
For rooms up to 225m³
Vents NK 250-2.4-1
The Vents NK 250-2.4-1 is an electric heater designed for heating air in round duct ventilation systems, suitable for HVAC applications. Built for versatile installation, it ensures uniform heat distribution in residential or commercial environments.
Vents NK 200-2.4-1
The Vents NK 200-2.4-1 is an electric duct heater designed for heating air in round duct ventilation systems, providing efficient overheating protection.
PRODAC - Easy CO₂ (Refill)
The Easy CO₂ bottle from Prodac is a disposable solution designed for CO₂ supply to aquarium plants. Fully compatible with all brands of regulators due to its standard design, this bottle ensures optimal carbon dioxide delivery, essential for the health and growth of your aquatic plants.